HP PSC 1500 - Manual (Page 6)

6 • HP All-in-One
15
Connect the USB cable
Macintosh Users: Windows Users:
Connect the USB cable to the port on the back
of the HP All-in-One, and then to any USB port
on your computer.
You may have to wait several minutes before you see
the onscreen prompt to connect the USB cable.
Once the prompt appears, connect the USB cable to
the port on the back of the HP All-in-One, and then
to any USB port on your computer.
If you do not see these screens, see
Troubleshooting on the next page.