Husqvarna CT16 - Manual (Page 6)

7
UPPER HANDLE
THROTTLE
CONTROL
LEFT SIDE
LOWER HANDLE
TINE SHIELD
DEPTH ROD/
TRANSPORT WHEELS
RIGHT SIDE
LOWER HANDLE
CULTIVATOR TINES
THROTTLE CONTROL - Controls the engine speed
and the tine rotation. This tiller/cultivator is equipped with a
centrifugal clutch that engages the tine drive system when the
engine speed is increased.
CHOKE CONTROL LEVER - Used to assist in starting
a cold engine.
SHUT-OFF SWITCH - Used to stop the engine.
STARTER HANDLE - The engine on this tiller/cultivator is
equipped with an easy pull recoil starter.
DEPTH ROD/TRANSPORT WHEELS - Used to adjust the
depth of the cut. It also acts as a brake to help the operator
control the direction and speed of the tiller/cultivator. It is
adjusted by removing the hairpin cotter and the clevis pin and
moving the depth rod to a different setting. Turn the depth rod
with the wheels down to transport the tiller/cultivator.
KNOW YOUR TILLER/CULTIVATOR
READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TILLER/CULTIVATOR. Compare the
illustrations with your tiller/cultivator to familiarize yourself with the location of various controls and adjustments. Save this manual
for future reference.
FIG. 1-OP
OFF
ON
C
H
O
K
E
OFF
FULL
CUL/DET ENGINE
AIR CLEANER
CHOKE CONTROL LEVER
RECOIL STARTER HANDLE
SHUT-OFF SWITCH
FUEL TANK
OPERATION