Hitachi DZMV550A - Manual (Page 98)

English
98
123
RECEIVING IMAGE FROM ANOTHER DEVICE (INPUT SOURCE)
If you wish to input an image from another device to this DVD video camera/recorder, you must first
switch the setting on the DVD video camera/recorder.
Refer to the explanation starting from
page 83 on how to connect the DVD video camera/recorder to
other devices or record images input from them.
* Displayed on DZ-MV580A only.
1
Press the MENU button,
choose “Input Source”
on the “Record
Functions Setup” menu
screen, and then press
the A button.
2
Choose “LINE”, and then press the A button.
3
Press the MENU button
to end the setting.
Note :
The “Input Source” setting will
return to “CAMERA” whenever
the DVD video camera/recorder
is turned off.
13
SWITCHING EXTERNAL INPUT RECORDING METHOD (PHOTO INPUT)
When “Input Source: LINE or S LINE” is specified, you can record stills of externally input images on
either a DVD-RAM disc or a card. The DVD video camera/recorder can record an external image with
little movement by specifying “Frame”, but “Field” is recommended for recording image with
movement.
1
Press the MENU button,
choose “PHOTO Input”
on the “Record
Functions Setup” menu
screen, and then press
the A button.
2
Select the desired option and then press the A
button.
3
Press the MENU button to end the setting.
Note :
• The PHOTO Input setting can be confirmed using the
on-screen information.
• The PHOTO Input setting will be stored in memory even
when the DVD video camera/recorder is turned off.
• Refer to “Recording (Dubbing) Images”, P. 83 to see how
to connect the DVD video camera/recorder to another
device.
Setting Content On-screen display
CAMERA Usually select this option. No display
LINE To input image from another device L IN
S LINE * To input S-VIDEO signal from another device S IN
CAMERA
L I NE
RAM
S L I NE
V I DEO Mode
OSD Ou t p u t
I n p u t Sou r ce
ENTER RETURN
Re c o r d F u n c t i o n s S e t u p
8 : 0 0 AM
9 / 3 0 / 2 0 0 4
3 0 MIN
0 : 0 0 : 0 0
REM
FINE
L IN
External input icon
Recording
format
Details of setting On-screen display
Frame
Does not suit recording of frequently moving video subjects, despite high
image quality. Frame suits recording of less moving video. B E C
Field
Suitable for recording of frequently moving video subjects.
B D C
RAM ENTER RETURN
Re c o r d F u n c t i o n s S e t u p
F i e l d
F r ame PHOTO I n p u t
Se l f T i mer
I n p u t Sou r ce
8 : 0 0 AM
9 / 3 0 / 2 0 0 4
9 9 9 REM
L IN Still external input icon