Hip Street HS-BB008 User Manual
Page 7
16. CD FWD Skip/Search
17. Tuning Knob
18. Radio band selector
AC POWER CONNECTION
Before using the unit, check that the local power supply is compatible with the 120V, 60HZ.
Do not plug or unplug the power cable when your hands are wet. When storing this unit for
long periods of time, disconnect the plug from the wall outlet. When disconnecting the power
cord from the wall outlet, grasp the plug; do not pull the cord in order to avoid shock risks
caused by the damaged cable.
BATTERY POWER OPERATION
1.
Open the Battery compartment (
#
5) on the underside of the unit.
2.
Insert 8 x “C” size batteries (not included) following the polarity as indicated in the
compartment to the right. Alkaline batteries are recommended.
3.
Replace the cover properly.
VOLUME
Adjust the VOLUME control (#8) to the desired level.
CD PLAYER OPERATION
1.
Set the Function Selector (#7) to the "CD" position.
2.
Open the CD Door (#2). Place an audio CD with its label side upward in the CD
compartment and close the CD Door.
3.
After a few seconds, the total number of tracks on the CD will appear in the CD Track
Display (#13).
4.
Press the CD PLAY Button (#14) and
the CD will start playing from the first track.
5.
Adjust the Volume Control (#8) to obtain the desired sound level from the Speakers (#9).
6.
To pause the music, press the CD PAUSE Button (#14). The CD Track Display will
flash. To resume, press the CD PLAY Button (#14) again.
7.
You can choose to play your favorite track directly by pressing the CD FWD Skip Button
(#16) to skip forward or CD REV Skip Button (#10) to skip backward. The CD Track
Display (#13) will indicate the correct track number selected.
8.
To repeat playing a particular track, press the REPEAT Button (#15) once. The Repeat
Indicator in the CD Track Display will flash.
9.
To repeat playing the entire CD
,
press the REPEAT Button (#15) twice. The Repeat All
Indicator in the CD Track Display will be solid.
10.
Press the REPEAT Button (#15) a third time and the Random Indicator in the CD Track
Display will stay solid and the tracks will play randomly.
11.
To stop playing, press the CD STOP Button (#12).
12. When you wish to turn off the CD Player, set the Function Selector (#7) to the "OFF"
position.
CD PROGRAMMED PLAY
This function allows the tracks to be played in a programmed sequence.
1.
Under CD stop condition, press the PROG. Button (#11). The CD Track Display (#13)
7