Hitachi HAS-K250 - Manual (Page 5)

ENGLISH
5
HAS-K250
 Remove the shipping screws from the arm assembly (A).
The arm assembly (A) is assembled before shipping. Before attaching the arm assembly to a wall, remove the
two shipping screws (M5 screws with spring washer and flat washer) as shown in the figure below.
Installation procedure
Shipping screw
(M5 screw with spring washer and flat washer)
Shipping screw
(M5 screw with spring washer and
flat washer)
*#5-A'0)KPFF