Operating instructions, Warning, How to use ultra-microfiber pads – Haan Floor Sanitizer SI-35 User Manual

Page 12

Advertising
background image

pg10 877-HAAN DIRECT / 877-422-6347

www.haanusa.com

Operating Instructions:

(cont)

Fig 6

Fig 7

!

i

Warning

Colors may bleed during
first wash. Be careful when
machine washing or drying
with mixed fabrics as
micro-fiber cloths will pick
up lint from other fabrics.

HELPFUL HAAN HINT:
You may dry your Ultra-
Microfiber pads in a machine
dryer on a low setting, but for
longer life, we recommend air
drying the pads.

Fig 5

How to Use Ultra-Microfiber Pads:

1) Please make sure that you always use completely

dried pads.

2) The Ultra-Microfber pad is made up of multiple

layers of super absorbent material. (Fig 5) The

outer layer is Ultra-Microfiber on one side and

a ‘hook & loop’ system on the other side that

attaches easily to the underside of the steam

head. Simply place the pad on the floor with the

‘hook & loop’ side up, and lightly press the SI-35

Floor Sanitizer down on the pad.

(refer back to Fig 4)

3) As high temperature steam passes through a pad

to contact the floor to kill germs, molds and mites,

it is natural that the pad gradually absorbs moisture.

After a certain length of time, the pad repels

water and becomes damp. When the pad becomes

saturated, turn the unit ‘OFF’ and wait until the

Floor Sanitizer cools down for approximately five

(5) minutes.Put your foot on a corner of the pad

and lift the Floor Sanitizer off the pad. (Fig 6)

Replace with a dry pad on the unit, turn the unit

back on and continue.

4) To keep the floor clean and dry, replace the pad

when it is dirty and/or saturated.

How to Clean and Store the HAAN

Ultra-Microfiber Pads:

1) Ultra-microfiber pads are easy to wash. Soak pads

for about 1-2 hours in cold or lukewarm water

with laundry detergent and hand wash them.You

can also drop the pads in a washing machine and

clean them using the gentle/delicate cycle. DO

NOT use fabric softener as this will compromise

the absorbancy of the microfiber. (Fig 7)

2) It is best to let the pads air dry but you can

place them in the dryer using low heat.

Advertising