HONDA HRR216S3DA - Manual (Page 46)

Draining the Fuel Tank and Carburetor
1. Remove the carburetor drain bolt with a 10 mm wrench, and drain
the carburetor bowl fuel into an approved container.
B
WARNING
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when
handling fuel.
•
Stop the engine and keep heat, sparks, and
flame away.
•
Handle fuel only outdoors.
•
Wipe up spills immediately.
2. Turn the fuel valve ON (see
page 9). This will allow fuel in
the fuel tank to drain through the
carburetor bowl. After the fuel is
completely drained, reinstall the
drain bolt.
Engine Oil
Change the engine oil (see page 33).
Engine Cylinder
Remove the spark plug (see page 36). Pour a tablespoon (5 ~ 10 cc)
of clean engine oil into the cylinder. Pull the starter rope several times
to distribute the oil in the cylinder. Reinstall the spark plug. Pull the
starter rope slowly until resistance is felt then return the starter grip
gently. This closes the valves so moisture cannot enter.
Handlebar Folding
Remove the grass bag (if
installed). Loosen the handlebar
locking knobs. Press the handlebar
struts outward to release the
locating pins, then swing the
handlebar forward. Don’t allow the
cables to be bent or pinched.
DRAIN BOLT
LOCKING KNOB
STORAGE
44