Hitachi CJ120VA - Manual (Page 16)

16
English
CONNECTING WITH CLEANER
By connecting with cleaner (sold separately)
through dust collector and adopter (sold
separately), most of dust can be collected.
(1) Remove the allen wrench from the base.
(2) Move the base fully forward. (Fig. 11, 12)
(3) Attach the chip cover with the shutter put
between the chip cover and gear cover. (Fig.
19)
(4) Connect the dust collector with adopter. (Fig.
20)
(5) Connect the adapter with the nose of cleaner.
(Fig. 20)
(6) Insert dust collector into the rear hole of the
base until the hook catches in the notch. (Fig.
21)
(7) Press the hook to remove the dust collector.
Fig. 20
Dust collector
Adapter
Chip
cover
Base
Nose
Cleaner
Hook
Notch
Fig. 21
Dust
collector Adapter
Base
Nose
Rear
hole
Fig. 19
Chip cover
Shutter