Features, Assembly – Homelite UT80546 User Manual

Page 11

Advertising
background image

Page 7 — English

FEATURES

PRODUCT SPECIFICATIONS

Engine ................................................................................................................................................................... 212cc OHV
Fuel Tank Capacity .....................................................................................................................................................0.96 gal
Oil Capacity ................................................................................................................................................................20.3 oz.
Maximum Pounds Per Square Inch Pressure* ......................................................................................................... 3,000 psi
Maximum Gallons Per Minute* ...................................................................................................................................2.5 gpm
Maximum Inlet Water Temperature ................................................................................................................................104˚F
*Max. rating determined by PWMA Standard 101, when tested with red nozzle

KNOW YOUR PRESSURE WASHER

See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.

212cc OHV ENGINE

This engine enables the pressure washer to achieve
3,000 psi (pounds per square inch) at a rate of 2.5 gpm
(gallons per minute).

ENGINE SWITCH

The engine switch is used in combination with the recoil
starter grip to start the engine. It is also used to turn the
engine off.

FUEL TANK

This fuel tank has a maximum capacity of 0.96 gal. Use
unleaded automotive gasoline in the engine.

HOSE STORAGE

Once the high pressure hose is rolled, hang it on the hook
located on the side of handle. Use the hook-and-loop strap
to secure in place.

RECOIL STARTER

The recoil starter is pulled to start the machine.

SOAP NOZZLE

The black soap nozzle is used to apply detergent at low
pressure only.

SPARK ARRESTOR

This engine is not factory equipped with a spark arrestor.
In some areas it is illegal to operate an engine without a spark
arrestor. A spark arrestor is available by calling customer
service for assistance.

THERMAL RELEASE VALVE

This pump feature will prevent water temperatures from
reaching harmful levels by releasing a small amount of
water. Once the water has drained, the thermal relief valve
will reset itself.

TRIGGER HANDLE

The trigger handle has a gripping surface that provides added
cont

rol of the spray wand and helps reduce fatigue.

TRIGGER WITH LOCK OUT

Pulling the trigger releases a stream of water for high
pressure cleaning. The lock out provides protection against
unauthorized use.

UNPACKING

This product requires assembly.

Carefully remove the product and any accessories from

the box. Make sure that all items listed in the packing list
are included.

WARNING:

Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.

NOTE: This tool is heavy. To avoid back injury, lift with
your legs, not your back, and get help when needed.

Inspect the tool carefully to make sure no breakage or

damage occurred during shipping.

Do not discard the packing material until you have care-

fully inspected and satisfactorily operated the tool.

If any parts are damaged or missing, please call

1-800-242-4672 for assistance.

ASSEMBLY

Advertising
This manual is related to the following products: