Harbor Freight Tools CENTRAL PNEUMATIC 40131 - Manual (Page 5)

Page 5 For technical questions, please call 1-800-444-3353. Item 40131
Operating instructions
Read the entiRe imPORtant SaFetY inFORmatiOn section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
inspect tool before use, looking for damaged, loose, and missing parts.
if any problems are found, do not use tool until repaired.
General Operating instructions
1. Attach a coupler (sold separately) to your
air compressor hose and apply thread
seal tape to the Inlet fitting on the Reel.
Connect the coupler to the Inlet fitting.
2. Connect your air tool to the other end of the Hose
using another coupler and thread seal tape.
3. Follow all instructions from the air tool
and compressor for set up and use.
4. When finished using the Hose, disconnect
the air tool and wind the hose. Wipe the
Hose Reel clean with a dry cloth.
Sa
Fet
Y
O
Pe
R
ati
O
n
m
aintenan
C
e
Setu
P