Hunter Fan 144860 User Manual
Page 20
Advertising
1
ATTACHING THE THERMOSTAT
1. Insert three AA alkaline batteries into the back of the thermostat.
2. Place the thermostat over the wall plate, aligning it over the terminal and battery
openings. Press the thermostat to the wall plate and it will snap into place.
NOTE: Do not force the thermostat onto the wall plate as this may damage the terminal pins. If the
thermostat does not snap into place easily, the unit may not work.
3. Restore power at the electrical panel and/or furnace.
44002-01 r051807
Advertising