Hamilton Beach 840104900 - Manual (Page 3)

5
NOTE: The Temperature Control
Dial steam setting should match
the Adjustable Steam Dial
setting. For example, if steam
ironing wool, the Adjustable
Steam Dial should be set to
light steam. Adjustable
Steam Dial
Temperature
Control Dial
Optional Feature
(on select models)
Auto Shutoff Reset Button/Light
This light comes on when the iron is first
plugged in. After 15 minutes, the iron will
shut off and the light will go out. Push the
Reset Button to turn the iron back on for
another 15 minutes of ironing.
4
1. Plug the ironing board into a standard
wall outlet.
2. Plug the iron into the receptacle
located on the leg of the ironing board.
NOTE: For use only with ironing board
model #111170 manufactured by
Whitney Design, Inc.
3. Turn the Adjustable Steam Dial to O.
4. Turn Temperature Control Dial to desired temperature.
Allow two minutes for iron to reach desired temperature.
How to Dry Iron
How to Steam Iron
1. Ensure that the ironing board and iron are unplugged.
2. Pour 4 ounces ( 1 ⁄
2
cup) of ordinary tap water into water
tank opening. Plug iron into ironing board.
3. Plug the ironing board into a standard
wall outlet.
4. Plug the iron into the receptacle
located on the leg of the ironing board.
NOTE: For use only with ironing board
model #111170 manufactured by
Whitney Design, Inc.
5. Turn Temperature Control Dial to
desired setting in the steam range. Allow two minutes for
the iron to reach desired temperature.
6. Turn the Adjustable Steam Dial to desired steam setting.
Water: Use ordinary tap water. For extremely hard water,
alternate between tap water and distilled water.
Steam Settings
840104900 Ev01.qxd 9/6/02 1:45 PM Page 4