Supported video modes, Minimizing eye strain, Minimizing energy consumption – HP 15-inchhp55 User Manual

Page 10

Advertising
background image

HP 15” Color Monitor User’s Guide

Supported Video Modes

8

English

English

Supported Video Modes

Your monitor supports the video modes shown in the table below.

CAUTION

Selecting a video mode on your computer with a screen
resolution/image refresh rate combination higher than 1024

×

768 at

60 Hz can damage your monitor. Selecting a video mode not supported
by your monitor will cause your monitor screen to blank.

Minimizing Eye Strain

To avoid screen flicker and minimize eye strain, use the highest
supported image refresh rate for the chosen resolution. It is
recommended that you use a refresh rate of 85 Hz. The image refresh
rate is the number of times per second that the image is refreshed.

Minimizing Energy Consumption

If your computer supports VESA monitor power management (available
on many HP computers), you can minimize the power consumed by the
monitor. There are two power saving modes:

Suspend mode

1

(uses less than 15W). In this mode, the monitor's

front panel indicator light is amber.

Active off mode

2

(uses less than 8W). In this mode, the monitor's

front panel indicator light is amber.

To set these power saving modes, refer to the manual that came with
your computer. If your screen is not displaying an image, check the
front panel indicator light first as your monitor may be in a power saving
mode.

Screen Resolution

Image Refresh Rate

640

×

350

70 Hz

640

×

400

70 Hz

640

×

480

60, 75, 85 Hz

800

×

600

60, 75, 85 Hz

1024

×

768

60 Hz,

1.

Suspend mode is activated when vertical sync is cut by the video controller.

2.

Active off mode is activated when both vertical and horizontal sync are cut by the video
controller.

Advertising