Harbor Freight Tools 97028 - Manual (Page 10)

Page 10 SKU 97028 For technical questions, please call 1-800-444-3353.
Troubleshooting
Problem Possible Causes Probable solutions
Mini Planishing
Hammer will not
operate when Foot
Pedal is depressed.
No air pressure in air line.
Regulator valve is closed.
Check all hoses, connections
and make sure the compressor is
operating.
Turn the valve counterclockwise.
Mini Planishing
Hammer operates
but at diminished
pressure.
Air Pressure is below normal operating
pressure of 90 PSI.
Regulator valve is closed.
Check Regulator on compressor and
Planishing Hammer.
Turn the valve counterclockwise.
Be sure to follow all manufacturer’s instructions, safety warnings and
maintenance procedures in the manual of the air compressor you are using with this
Mini Plannishing Hammer.
lEasE rEad THE FOllOWiNg CarEFullY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS qUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
qUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE
UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION
OF REPLACEMENT PARTS THERETO.
record Product’s serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not
available individually as replacement parts.