haier HB500BSS - Manual (Page 10)

English
9
Cleaning and Maintenance
Warning! Never immerse the motor base, power cord and plug in water or
other liquids as this may cause a risk of fire or electrical shock. Do
not use harsh or abrasive cleaners on any part of the blender.
Quick Cleaning
• Make sure that the power switch is in the “0” off position.
• Remove the glass jar from the motor base and rinse with warm water to
remove large food particles.
• Fill the glass jar with 1-1/2 cups of warm, soapy water and cover tightly.
Note: Never use boiling water as it may damage the blade assembly and
shorten the life of the blender. Boiling water may also cause steam
buildup and cause personal injury.
• Replace the jar on the motor base.
• Press the Pulse button for a few seconds and repeat several times.
• Remove the jar from the motor base and rinse well.
• Repeat as necessary.
• Dry thoroughly.
Thorough Cleaning
• Make sure that the power switch is in the “0” off position.
• Always unplug the blender before cleaning.
• Remove the glass jar from the motor base and rinse with warm water to
remove large food particles.
• Disassemble the jar assembly parts. Be careful when handling the blade
assembly.
• Wash the jar, cover, measuring cup, gasket, collar and blade assembly in
warm, soapy water.
Note: All components of the jar assembly are dishwasher safe. The cover
and the gasket should be washed on the upper rack of the dishwasher.
• Dry thoroughly.
• Wipe the power cord and the motor base with a clean, damp cloth and wipe
dry.
Storage
Store the blender fully assembled and in an upright position in a clean,
dry cabinet.