Holman DIAL EZY N10372 - Manual (Page 5)

PAGE 7
Before proceeding, ensure your watering planner has
been completed. From this, you should be aware of
which stations are allocated to each program.
Note: Set one program at a time -This will ensure that
all the values are entered correctly.
SETTING PROGRAM 1 - The program number
can only be set/changed in the Set Start Times position.
Step 1. Set Start Times
All valves will activate in sequential order for each start
time. Turn the dial to Set Start Times and ensure that
“Prog 1” is flashing.
The display will show:
Press next & “Start 1” willl flash.
Press next & the “hour” will flash. Use or to adjust.
Note: AM / PM is set correctly.
Press next & the “minutes” will flash. Use or to
adjust, if required. Each program has up to four start
times and should you require a second start time,
Press
next twice & “Start 1” will flash.
Advance to start 2 by pressing .
The display will show.
Press next and proceed as per setting Start 1.
Tip: To turn an active start time off, turn the dial to the Set
Start times position, Select the start number required
using the button and then press next until the “hour”
is flashing. Use or until “OFF” is shown.
Tip: “OFF” position is between 12 and 1pm.
Programming Programming
Set Current Time & Correct Day
Turn the dial to Set Clock/Calendar position.
The hour will be flashing. Use or to adjust.
Note: AM / PM must be set correctly.
Press the next button and the “minutes” will flash.
Use or to adjust.
Press next and the “day of the week” will flash.
Use or to set correct day.
Set Calendar (Optional)
Note: The calendar only needs to be set when selecting
ODD/EVEN day watering in areas where water
restrictions may require this feature.
Press back button until the year, month and day are
shown. The “year” will be flashing.
Use or to adjust, if required.
Press back button and the “month” will flash.
Use or to adjust.
Press back and the “day” will flash. Use or to
adjust. Tip: To return to the clock, press next , or turn dial
to another position.
Note: When in the “Auto” position “ODD” or “EVEN” will be
shown.
PAGE 6