Husqvarna 9032PW - Manual (Page 10)

English — 9
4. Connect the high pressure hose to the pump outlet
(See Figure 4).
5. Attach the lance with nozzle to the gun (See
Figure 5).
6. Install quick connect tip by pulling back on collar
and pressing in tip. Release collar, make sure it
completely returns to its forward position and tip is
secure (See Figure 6).
PRE-OPERATION
Figure 5 - Attach lance to gun
Figure 6 - Quick Connect Tip
Pull collar back
For models 5525PW: Insert spray tips into the
rubber tip holder. Then attached the tip holder to
handle by wrapping around and inserting tail end
through hole to secure (See Figure 7).
For models 6027PW, 9032PW, and 1340PW: Insert
spray tips into rubber grommets on placard (See
Figure 8).
Figure 7 - Insert spray tips into the rubber tip
holder
Figure 8 - Insert spray tips into the placard