Hotpoint HE63 HE73 HE93 - Manual (Page 2)

2
! It is important to conserve this booklet for
consultation at any moment. In the case of sale,
cession or move, make sure it is together with the
product.
! Read the instructions carefully: there is important
information about installation, use and safety.
! Do not carry out electrical or mechanical variations
on the product or on the discharge conduits.
Installation
Electric connection
! The power tension must correspond with the tension
shown on the characteristics label situated inside the
hood. If provided with a plug, attach the hood to a
socket conforming to the regulations in force and
placed in an accessible zone. If without a plug,
( connected directly to the power supply ), use a
regulation bipolar switch with a distance of the
contacts on opening not less than 3mm (
accessible ).
! If necessary, the situating of the supply cable must
be carried out by the technical assistance service or a
qualified person.
! An authorized installer must carry out the electrical
connection of the hood.
! The company declines any responsibility whenever
these regulations are not respected.