Health O Meter 7631 User Manual
Page 11
11
11
3.
When cuff pressure reaches your approximate systolic blood pressure,
measurement will be complete and will be followed by the release of
cuff pressure.
When the monitor completes the measurement, it will automatically
display and store the systolic, diastolic and pulse reading into memory.
The last 90 measurement readings will be saved into memory.
4.
Measurement is now complete. Press the POWER button to turn the
unit off. The unit will automatically shut-off after 1 minute if no buttons
are pressed.
Recalling Memory
1.
To recall stored blood pressure readings from the memory, simply press
the MEMORY button. The last set of readings recorded in memory
will be displayed.
2.
Another press of the MEMORY button will recall the previous set
of readings.
3.
All readings stored in memory will be displayed with their corresponding
sequence number.