HONDA Honda Engine GX100 - Manual (Page 10)

ENGLISH
Spark Arrester Removal
Spark Arrester Cleaning & Inspection
SPARK ARRESTER (optional equipment)
SPARK ARRESTER
MUFFLER
SPARK ARRESTER SCREEN
MUFFLER
PROTECTOR
6 12 mm
FLANGE
BOLTS (3)
4 6 mm
SPECIAL SCREW
10
The spark arrester must be serviced every 100 hours to keep it
functioning as designed.
If the engine has been running, the muffler will be hot. Allow it to
cool before servicing the spark arrester.
Your engine is not factory-equipped with a spark arrester. In some
areas, it is illegal to operate an engine without a spark arrester.
Check local laws and regulations. A spark arrester is available
from authorized Honda servicing dealers.
Remove the special screw from the spark arrester, and remove
the spark arrester from the muffler.
Install the spark arrester and muffler protector in the reverse
order of disassembly.
Use a brush to remove carbon
deposits from the spark arrester
screen. Be careful not to damage
the screen. Replace the spark
arrester if it has breaks or holes.
Remove the three 6 mm bolts from the muffler protector, and
remove the muffler protector. 1.
2.
1.
2.
07/06/01 13:20:24 32Z4E800_010