Havis-Shields Vehicle Specific Console C-VS-1100-F150 User Manual
Page 2
Advertising
C-VS-1100-F150-INST-1-07
2. REPLACE COMPONENTS REMOVED IN SUB ASSEMBLY:
• Replace Rear Console Face Plate.
• Replace Forward Console Face Plate.
• Replace Armrest Pad.
3. INSTALL CONTROLS:
• Wire all controls prior to installation.
Note: A hole must be drilled in the bottom of the OEM console for routing of wires.
• Attach control heads to console plate using equipment brackets or filler panels with
#8 x 3/8” Black Torx Screws.
Note: You may have to drill the console plate in the occasional situation that the mounting slots do not line up
with the equipment bracket.
Front Face Plate
Armrest
Rear Face Plate
Advertising