Attaching the thermostat – Hunter Fan 40135 User Manual
Page 18
Advertising
18
ATTACHInG THE THErMOSTAT
4. locate the
HE/HG
switcH
on the back of the
thermostat. Set the switch to
HG
for a gas
furnace or oil burner. Set the switch to
HE
for
electric furnaces.
(The switch has no effect when the system is set to
cooling mode.)
5. Insert two fresh AA alkaline batteries.
6. Align the thermostat with the the wall plate,
and snap the two halves together.
7. restore power at the electrical panel or
furnace.
InSTAllInG THE THErMOSTAT, COnT.
Advertising