Harbor Freight Tools 95364 User Manual
Page 3
SKU 95364
For technical questions please call 1-800-444-3353. Page 3
Warning:
The warnings, cautions, and instructions discussed in this manual cannot cover all
conditions and situations that may occur. Common sense and caution are factors
which cannot be built into this product, but must be supplied by the operator.
Unpacking and Assembly
When unpacking your Digital Scale, check to make sure that the product is intact and undamaged.
If any parts are missing or broken, please call
HARBOR FREIGHT TOOLS at: 1-800-444-3353.
Your Digital Scale requires no assembly. It is important that you read the entire manual to become
familiar with the product BEFORE you use the Digital Scale.
Place the Scale in a sheltered area when in use as air movement and breathing on the scale
will affect accuracy. Always place objects on the platform gently.
Installing and Replacing Batteries
1.
Turn the Scale on its side. Remove the battery compartment cover by pressing the tab
towards the cover and lifting it off.
2.
Insert four 1.5V “AA” batteries into the battery compartment. Be sure to align batteries with
the corresponding polarity.
3.
Replace the battery compartment cover.
Using the Adaptor
Your Digital Scale can also be operated with the AC Adaptor that is included with the Digital Scale.
1.
Connect the Adapter plug to the receptacle located at the rear of the Digital Scale.
2.
Plug the Adapter into the wall outlet. The Digital Scale is ready for operation.
Operation
1.
Place the Digital Scale on a flat surface in the work area.
2.
Press the
ON/TARE switch once. The Scale will start operating. When “0” “and” “ 0 ”
appear on the digital display, the Scale is ready for weighing.
3.
Gently place the item to be weighed on the platform. The weight will appear on the display.
4.
When weighing substances that must be put into a container (such as powders or liquids),
place the empty container on the Scale platform. Press the
ON/TARE switch. The digital
display will return to zero, eliminating the weight of the container. A “ 0 ” readout will
appear in the lower left corner of the display.
5.
Pour the powder or liquid in the container. The weight of the substance will appear on the
digital display.
6.
To turn off the Scale, press the OFF switch. The Scale is also equipped with an auto shut-off
function. The scale will automatically turn off 40 seconds after an item is weighed.
Rev 07k