Security features, Secure the embedded web server, Manage temporary job files – HP 7000N User Manual
Page 63
Security features
The following security features are available on this product.
●
Secure the Embedded Web Server
●
●
●
●
●
HP High-Performance Secure Hard Disks
●
●
Authentication and authorization
Secure the Embedded Web Server
Assign a password for access to the Embedded Web Server so that unauthorized users cannot
change the product settings.
1.
Open the Embedded Web Server.
2.
Click the Security tab.
3.
On the left side of the window, click the General Security link.
4.
Type the password in the New Password box, and type it again in the Verify Password box.
5.
Click the Apply button. Make note of the password and store it in a safe place.
Manage temporary job files
To specify how your product manages temporary job files that are created when scans are initiated,
follow these steps.
1.
In the Embedded Web Server, click the Security tab, and then click the Protect Stored Data
link.
2.
Under Managing Temporary Job Files, select a file erase mode.
●
Non-Secure Fast Erase. This is a simple file-table erase function. Access to the file is
removed, but actual data is retained on the disk until it is overwritten by subsequent data-
storage operations. This is the fastest mode. Non-Secure Fast Erase is the default erase
mode.
●
Secure Fast Erase. Access to the file is removed, and the data is overwritten with a fixed
identical character pattern. This is slower than Non-Secure Fast Erase, but all data is
overwritten. Secure Fast Erase meets the U.S. Department of Defense 5220-22.M
requirements for the clearing of disk media.
●
Secure Sanitize Erase. This level is similar to the Secure Fast Erase mode. In addition,
data is repetitively overwritten by using an algorithm that prevents any residual data
persistence. This mode will impact performance. Secure Sanitize Erase meets standards
for clearing disk media defined in NIST Special Publication 800-88 Guidelines for Media
Security features
55