Huawei ADSL2+Broadband Router Aolynk DR814 - Manual (Page 67)

User Manual
Aolynk DR811/DR814 ADSL2+Broadband Router
7 Service Configuration
64
Figure 7-7 PPPoE
Enter the proper values of connection options, and then click the button.
& Note:
l Supply the Service name parameter for a PPPoE interface when it is required by
the ISP. The ISP uses this to identify the type of connection to use for the interface.
l Each PPPoE interface is IP-enabled, i.e. it has an associated IP address. You may
specify this IP address in the WAN IP address if the address is allocated statically by
the ISP. If the IP address is obtained dynamically, specify this IP address as
“0.0.0.0”.