HONDA WSP33AA - Manual (Page 8)

6
Check the nameplate for your pump’s head (HEAD), discharge volume (CAPACITY),
speed (SPEED), motor voltage and current. Other specifications are noted in the
chart below:
Discharge Motor Motor Weight
Model Diameter (Inch) Output (HP) Phase Voltage (LB)
WSP33AA 1 1 /
4
1 /
3
1 115 11
WSP53AA 1 1 /
2
1 /
2
1 115 27
WSP73AA 1 1 /
2
3 /
4
1 115 27
CAUTION
Be careful not to exceed the given specifications in the use of your products.
• Screw driver
• Pipe wrench
• Adjustable wrench (medium-large)
• Hacksaw with 24-tooth blade for cutting plastic pipe
• Knife or round file for smoothing inside of all plastic pipe connections
General Specifications
Tools Needed
• PVC or ABS pipe cement (read manufacturer’s instructions carefully)
• PVC or ABS pipe;
– 1 1 /
4
" for WSP33AA
– 1 1 /
2
" for WSP53AA, WSP73AA
• PVC adapter
– 1 1 /
4
" for WSP33AA
– 1 1 /
2
" for WSP53AA, WSP73AA
• In line check valve
• Sump basin 18” or larger diameter plastic, fiberglass or concrete.
(See page
5 for minimum diameter basin size by pump capacity.)
• Optional: gate valve
(see installation drawing on page
11)
Materials Needed
0204 HONDA WSP manual.qxd 3/24/2004 2:14 PM Page 8