Hi-Touch Imaging Technologies P510S - Manual (Page 38)

How to Do Direct Wireless Printing By P510Si
Scenario 1
Using Canon DSLR to take pictures and printing photos by P510Si
(Example on Canon 30D/20D)
Before the setting, you need to connect Canon wireless file transmitter to your camera in advance. For detailed
instruction of transmitter setting, there’s need to read the user’s manual of Canon wireless file transmitter WFT-E1A. On
P510Si, we provide a brief introduction of how to set up your Canon transmitter.
1) On P510Si, go to Settings \ Advanced Setting
2) Select Wireless for Camera and then enable the function. Exit the setup page and wireless adapter automatically
activates. See below for detail
3) After wireless function is activated, by EDIT button users can see the detailed info about wireless adaptor of P510Si.
Press “ X ” to start the instruction of setting camera wireless file transmitter.
SSID is allowed to change freely.
However, setting of SSID on P510Si
MUST be consistent with SSID setting
on camera transmitter.
Selecting Canon camera Connecting transmitter & camera Working on LAN setting
FTP setup
SSID setup
If setup is correct, you will see signal
shown on LCD of transmitter
After transmitter setting is done, you can start taking pictures on your Canon camera
38