Haan SELECT SI-60 - Manual (Page 9)

7
Before Using Your Floor Sanitizer
Be sure to read ALL instructions and warnings before using
your Floor Sanitizer.
1. Handle
2. Floor Setting Control
3. Floor Setting Indicator Light
4. Steam Power Switch
5. Telescopic Handle
6. Handle Length Adjustment Button
7. Storage Hook (rotates 360º)
8. Main Body Assembly Screw
9. Power Cord
10. Water Tank Release Button
11. Detachable Water Tank
12. Power Cord Organizer (bottom)
13. Assembly Screw (x1)
Located in Fresh Rinse Bag
14. Floor Protector / Resting Mat
15. Carpet Glide
16. Ultra-microfiber Pads (x2)
17. Fresh Rinse Lime & Scale Remover (x12)
Helpful Hint:
To extend the life of your
Ultra-Microfiber Pads,
always place your unit on
the floor protector/resting
mat while the unit heats
up. Attach the Ultra-Mi-
crofiber pad when the unit
is ready to use.
Helpful Hint: Helpful Hint:
When heated, never leave the ap-
pliance in one spot on any surface
for any period of time. Always
place your Floor Sanitizer on the
Floor Protector/Resting Mat when
stationary. Always empty water from water
tank after use. To ensure opti-
mum product function use Fresh
Rinse
™ once a month.
Helpful Hint:
When using the Floor
Sanitizer with the Carpet
Glide it will not lift all set-in
stains from your carpet,
our patented Ultra-micro-
fiber pad may be used
to act as a “blotter” for
removing most fresh, wet
spills and stains.
Your floor sanitizer is designed to clean hard floor surfaces that will withstand high
heat. Do not use on unsealed wood or unglazed ceramic floors. On surfaces that
have been treated with wax or some no-wax floors, the sheen may be removed by
the heat and steam action. It is always recommended to test an isolated area of the
surface to be cleaned before proceeding. We also recommend that you check the
use and care instructions from the floor manufacturer.
WARNINg