Hoshizaki KM-1301SWH/3 - Manual (Page 7)

7
See the nameplate for electrical and refrigeration specifications. This nameplate is located
on the rear panel.
Since this nameplate is located on the rear panel of the icemaker, it cannot be read when
the back of the icemaker is against a wall or against another piece of kitchen equipment.
Therefore, the necessary electrical and refrigeration information is also on the rating label,
which can be easily seen by removing only the front panel of the icemaker.
We reserve the right to make changes in specifications and design without prior notice.
4. KM-1301SWH3 (water-cooled)
HOSHIZAKI ICE MAKER
MODEL NUMBER KM-1301SWH3
SERIAL NUMBER
AC SUPPLY VOLTAGE 208-230/60/3
COMPRESSOR 208-230V 6.1RLA 51LRA
PUMP 120V 1.2FLA 60W
FAN --- --- ---
OTHER 115-120V 0.3A
MAXIMUM FUSE SIZE 20 AMPS
MAX. HACR BREAKER(USA ONLY) 20 AMPS
MAX. CIRC. BREAKER (CANADA ONLY) 20 AMPS
MINIMUM CIRCUIT AMPACITY 20 AMPS
DESIGN PRESSURE HI-427PSI LO-230PSI
REFRIGERANT 404A 2 LBS. 8.2 OZ.
MOTOR-COMPRESSOR THERMALLY PROTECTED,
NOT INTENDED FOR OUTDOOR USE!
Hoshizaki America, Inc.
Peachtree City, GA
www.hoshizaki.com
ICE MAKER WITHOUT
STORAGE MEANS
946Z COMPONENT
For certification marks, see the nameplate
on the rear panel.