Honeywell NR Series - Manual (Page 2)

Manual Switches NR Series
Sealed Rocker Switches
124 Honeywell ɀ Sensing and Control ɀ 1-800-537-6945 USA ɀ ⍣1-815-235-6847 International ɀ 1-800-737-3360 Canada
NOTE: Catalog listings in the order
guides below do not include
rocker operators. See ‘‘How to
Order.’’
Application Note: Honeywell MICRO SWITCH does not recommend the use of silver
cadmium oxide switch contacts in non-arcing loads. Non-arcing loads are generally
loads less than 12 volts and/or 0.5 amp. NR switches use silver cadmium oxide
contacts. For other options, contact the MICRO SWITCH Application Center at
1-800-537-6945.
NR 2-POSITION FLUSH-PANEL MOUNT ROCKERS ORDER GUIDE
Circuits Made With Rocker At:
Termination Style No.
of
Poles
Ident. Lug
Position
Opposite Lug
Position
UL Rating
Code
Elect.
Rating
Code Screw Solder Q-C
OFF 2-3 L191 1 1NR1-2 11NR1-2 1NR91-2
1 1-2 2-3 L191 1 1NR1-3 11NR1-3 1NR91-3
OFF* 2-3 L192 2 1NR1-4 11NR1-4 1NR91-4
1-2* OFF L192 2 1NR1-6 11NR1-6 1NR91-6
1-2* 2-3 L192 2 1NR1-8 11NR1-8 1NR91-8
OFF 2-3, 5-6 L191 3 2NR1-2 12NR1-2 2NR91-2
2 1-2, 4-5 2-3, 5-6 L191 3 2NR1-3 12NR1-3 2NR91-3
OFF* 2-3, 4-6 L192 4 2NR1-4 12NR1-4 2NR91-4
1-2, 4-5* OFF L192 4 2NR1-6 12NR1-6 2NR91-6
1-2, 4-5* 2-3, 4-6 L192 4 2NR1-8 12NR1-8 2NR91-8
OFF 2-3, 5-6, 8-9, 11-12 L191 5 4NR1-2 14NR1-2 4NR91-2
4 1-2, 4-5, 7-8, 10-11 2-3, 5-6, 8-9, 11-12 L191 5 4NR1-3 14NR1-3 4NR91-3
OFF* 2-3, 5-6, 8-9, 11-12 L192 6 4NR1-4 14NR1-4 4NR91-4
1-2, 4-5, 7-8, 10-11* OFF L192 6 4NR1-6 14NR1-6 4NR91-6
1-2, 4-5, 7-8, 10-11* 2-3, 5-6, 8-9, 11-12 L192 6 4NR1-8 14NR1-8 4NR91-8
NR 3-POSITION FLUSH-PANEL MOUNT ROCKERS ORDER GUIDE
Circuits Made With Toggle At:
Termination Style No.
of
Poles
Ident. Lug
Position
Center
Positon
Opposite Lug
Position
UL Rating
Code
Elect.
Rating
Code Screw Solder Q-C
1-2 OFF 2-3 L191 1 1NR1-1 11NR1-1 1NR91-1
1 1-2* OFF 2-3 L192 2 1NR1-5 11NR1-5 1NR91-5
1-2* OFF 2-3* L192 2 1NR1-7 11NR1-7 1NR91-7
NONE** OFF 2-3 L191 1 1NR1-21 11NR1-21 1NR91-21
NONE** 1-2 2-3 L191 1 1NR1-31 11NR1-31 1NR91-31
NONE** 1-2 2-3* L192 2 1NR1-51 11NR1-51 1NR91-51
1-2* OFF NONE** L192 2 1NR1-61 11NR1-61 1NR91-61
1-2, 4-5 OFF 2-3, 5-6 L191 3 2NR1-1 12NR1-1 2NR91-1
2 1-2, 4-5* OFF 2-3, 5-6 L192 4 2NR1-5 12NR1-5 2NR91-5
1-2, 4-5* OFF 2-3, 5-6* L192 4 2NR1-7 12NR1-7 2NR91-7
NONE* OFF 2-3, 5-6 L191 3 2NR1-21 12NR1-21 2NR91-21
NONE** 1-2, 4-5 2-3, 5-6 L191 3 2NR1-31 12NR1-31 2NR91-31
NONE** 1-2, 4-5 2-3, 5-6* L192 4 2NR1-51 12NR1-51 2NR91-51
1-2, 4-5* OFF NONE** L192 4 2NR1-61 12NR1-61 2NR91-61
1-2, 4-5 2-3, 4-5 2-3, 5-6 L191 3 2NR1-12 12NR1-12 2NR91-12
1-2, 4-5* 1-2, 5-6 2-3, 5-6 L192 4 2NR1-50 12NR1-50 2NR91-50
1-2, 4-5* 1-2, 5-6 2-3, 5-6* L192 4 2NR1-70 12NR1-70 2NR91-70
1-2, 4-5, 7-8, 10-11 OFF 2-3, 5-6, 8-9, 11-12 L191 5 4NR1-1 14NR1-1 4NR91-1
4 1-2, 4-5, 7-8, 10-11* OFF 2-3, 5-6, 8-9, 11-12 L192 6 4NR1-5 14NR1-5 4NR91-5
1-2, 4-5, 7-8, 10-11* OFF 2-3, 5-6, 8-9, 11-12* L192 6 4NR1-7 14NR1-7 4NR91-7
NONE* OFF 2-3, 5-6, 8-9, 11-12 L191 5 4NR1-21 14NR1-21 4NR91-21
NONE** 1-2, 4-5, 7-8, 10-11 2-3, 5-6, 8-9, 11-12 L191 5 4NR1-31 14NR1-31 4NR91-31
NONE** 1-2, 4-5, 7-8, 10-11 2-3, 5-6, 8-9, 11-12* L192 6 4NR1-51 14NR1-51 4NR91-51
1-2, 4-5, 7-8, 10-11* OFF NONE** L192 6 4NR1-61 14NR1-61 4NR91-61
1-2, 4-5, 7-8, 10-11 2-3, 4-5, 7-8, 11-12 2-3, 5-6, 8-9, 11-12 L191 5 4NR1-12 14NR1-12 4NR91-12
1-2, 4-5, 7-8, 10-11* 2-3, 4-5, 7-8, 11-12 2-3, 5-6, 8-9, 11-12 L192 6 4NR1-50 14NR1-50 4NR91-50
1-2, 4-5, 7-8, 10-11* 2-3, 4-5 2-3, 5-6, 8-9, 11-12* L192 6 4NR1-70 14NR1-70 4NR91-70
* These positions are momentary. All others are maintained.
** Toggle lever is blocked from these products. Toggle becomes 2-position, with center being one extreme position.
TERMINAL CIRCUIT IDENTIFICATION
Terminal identification numbers referenced in the order guides
are molded into the switch base.
These numbers indicate which circuits are made in each rocker
position (e.g. ‘‘1-2’’ refers to circuit closure through terminals 1
and 2).