HONDA 08E91-E22-100B - Manual (Page 16)

16 of 22
AII 38215-38958 (0802) © 2008 American Honda Motor Co., Inc. - All Rights Reserved.
54. Install the clip from the engine starter harness to
the fuse box bracket behind the fuse box.
53. Unplug the white vehicle 14-pin connector at the
front lower pillar behind the fuse box, and plug the
engine starter harness 14-pin connectors into the
white 14-pin connector. Attach the engine starter
harness 14-pin connector to the vehicle 14-pin
connector.
55. Remove the ground bolt from the vehicle. Secure
the engine starter harness ground terminal with the
ground bolt you just removed.
52. Behind the fuse box, unplug the blue vehicle 23-
pin connector from the inside of the front lower
pillar, and plug the blue engine starter harness 23-
pin connectors into the blue vehicle 23-pin
connector. If the vehicle 23-pin connector is
difficult to disconnect, perform the work after first
disconnecting the connector on the upper side.
6D01152T
WHITE VEHICLE
14-PIN
CONNECTOR
ENGINE
STARTER
HARNESS
14-PIN
CONNECTOR
VEHICLE 14-PIN
CONNECTOR (white)
FUSE BOX
6D01132T
VEHICLE 23-PIN
CONNECTOR
(blue)
FUSE BOX
ENGINE STARTER
HARNESS 23-PIN
CONNECTOR (blue)
FRONT
LOWER
PILLAR
FRONT
SIDE VIEW
6D01181T
ENGINE
STARTER
HARNESS
FUSE BOX
BRACKET
CLIP
FRONT
GROUND BOLT
(Reuse.)
ENGINE STARTER
HARNESS GROUND
TERMINAL
www.collegehillshonda.com