Henkel K-900 - Manual (Page 2)

Henkel, Inc.
P.O. Box 1322 * Hammond, Louisiana * 70404 * (985) 345-2171
www.keenovens.com
Models K-900 & K-1000 Holding Ovens
Installation Instructions & Repair Parts List
One Year Limited Warranty
Henkel, Inc. warrants its products against defects in material and workmanship. Henkel,
Inc. will either repair or replace without charge any properly installed product which fails
under normal operating conditions within one year from date of installation, provided it is
returned to our factory, transportation prepaid, and our inspection determined it to be
defective under the terms of this warranty. The warranty covers only equipment
manufactured by Henkel, Inc., and does not extend to transportation, installation, or
replacement charges at the buyers’ facility; nor does it apply to any other equipment of
another manufacturer used in conjunctions with Henkel, Inc. equipment. No other
warranty, expressed or implies exists beyond that included in this statement.
Recommended Spare Parts
When it is critical to have continuous operation of this unit;
we suggest having the following spare parts on hand:
Heating Element Assembly
Power Cord
Thermostat Assembly & Thermometer Kit
General Information
The model K-900 is a 1000 lb. capacity holding oven. The K-1000 is a 1500 lbs.
capacity holding oven. Both of these ovens are designed to hold 18” electrodes at
moderate optimum temperatures to assure dryness. Construction is of steel which has
been treated and then painted with a chemical-resistant blue finish. All Keen ovens are
Mercury free.