Hypertec HYNTR70002 - Manual (Page 2)

European Community (EC) Electromagnetic Compatibility
Directive.
This equipment had been tested and found to comply with the protection requirements of
European Emission Standard EN55022 and the Generic European Immunity Standard
EN50082-1. This equipment is designed to operate in a domestic environment and as such
is tested to the EN5022 ITE domestic emissions limit. The domestic immunity standard
EN50082-1 calls for the following basic standards:
(a) IEC 801-2 Electrostatic Discharge
(b) IEC 801-3 RF Immunity
(c) IEC 801-4 Transient Burst
This product also complies with the requirements of the EMC Directive 89/336/EEC. The
products were tested in a typical configuration.
Copyright
This document and all material contained within it are copyrighted. The document may
not, in whole or part, be copied, photocopied, reproduced, translated, or reduced to any
electronic medium or machine readable form without prior written consent from
HYPERTEC.
HYPERTEC reserves the right to make modifications to the product without notification.
Hypertec is a trademark and the Hypertec logo is a registered trademark of HYPERTEC.
All other brand and product names included herein may be trademarks of the respective
companies.
©1998 Hypertec, Ltd. All rights reserved.