Havis-Shields Kwik Kit KK-100-02 - Manual (Page 2)

CEILING:
The ceiling for the rear compartments will be 48” wide X 100” long. The complete ceiling assembly will be a four-piece
design with flush, overlapping, bolt together seams for added strength. It will be constructed from .125” thick aluminum
and will have pre-cut holes for dome lights and air conditioning / heat vents. The ceiling assembly will bolt to mating
walls and bulkheads.
FLOORING:
The flooring for the rear compartments will be constructed from .125” thick, bright-dipped aluminum tread plate. The main
floor is 36” wide X 97” long. Additional 7 ½” X 48” tread plate will be provided for space between rear bulkhead and
OEM rear doors.
REAR STEP:
A rear step shall be supplied with the kit and will bolt directly to the vehicle frame. It will be 48" wide by 10" deep. The
step will be constructed from welded steel angle framework, and will have a perforated non-slip deck surface. Steel parts
will have a black polyester powder coat finish.
DOME LIGHTS:
The driver side rear compartment will have three (3) 4” diameter stainless steel dome lights. The passenger side
compartment will have three (3) 4” diameter stainless steel dome lights. All dome lights will have tamperproof .250” thick,
clear polycarbonate guards. On/off rocker switch will be in driver compartment dash area.
GRAB STRAPS AND LABELS:
Heavy-duty nylon webbing straps will be mounted to the lower section of the wall. There will be one (1) strap per seat
location. Straps will be positioned so that each prisoner, with handcuffs behind their back, can hold onto the strap. Each
strap will be anchored with 1/2" X 1 1/4" round head tamper proof bolts. The bolts will attach to the bench and wall
assemblies. Straps to be made by a certified automotive belt manufacturer. In addition, the kit will have four (4) – Yellow
labels (4” x 6”) with black lettering that read “Hold on to Straps When Vehicle is in Motion”. Each Label includes lettering
in English and Spanish. They will also include a picture of two hands holding a Strap. Two (2) more labels will be provided
that read “Drive with Extra Caution While Transporting Passengers”. These labels are also yellow with black lettering for
mounting on dash of vehicle cab.
MISCELLANEOUS:
1. When all components of insert are completed assembled and installed, all seams will be sealed with RTV silicone.
2. An aluminum plate with white powder coat finish will cover the accommodations in the driver side bench, wall and rear
bulkhead. This cover will guard the OEM air conditioner / heat evaporator blower system from detainees and will allow for
easy access when removed for service.
FINISH:
All aluminum parts will have a super durable White polyester powder coat finish. The profile of the aluminum sub-straight
will have proper pretreatment preparation to withstand a minimum of 1,000 hour salt spray exposure (per ASTM-B117
testing). Written test results must be available upon request.
KK-100-02_SS_10-08