Humminbird 531324-1_D - Manual (Page 21)

Add a Waypoint Target or Trolling Grid
Add or Remove a Waypoint Target: From the
Waypoints submenu, select Target and press
the RIGHT Cursor key to display a list of
waypoints. Select the waypoint you want to
target. A target consisting of concentric circles
centered on the selected waypoint will appear
on all of the navigation views; the target shows
various distance ranges from the targeted
waypoint. To remove the target, choose
Remove Target from the Navigation X-Press™
Menu, and press the RIGHT Cursor key.
Add or Remove a Trolling Grid: From the
Waypoints submenu, select Grid and press the
RIGHT Cursor key to display a list of waypoints.
Select the waypoint to which you want to add
the grid. The trolling grid will appear on all of
the navigation views and can be used as a
guide when trolling around a waypoint. The
grid can be rotated to any desired heading
using Grid Rotation from the Navigation main
menu. To remove the trolling grid, choose
Remove Grid from the Navigation X-Press™
Menu, and press the RIGHT Cursor key.
NOTE: Only one waypoint can have either a target or a grid at one time. If you apply a target or a
grid to a new waypoint, the original waypoint will lose its target or grid.
NOTE: The spacing of the rings on the waypoint target and the spacing of the grid lines on the
trolling grid is the same as the length of the scale bar on the left edge of the display. Zooming in
or out will decrease or increase the spacing, respectively.
Track View with Grid
Waypoint
Trolling
Grid
Track
Scale
Track View with Target
Waypoint
Target
Track
Scale
15