Humminbird 737 - Manual (Page 57)

Sonar X-Press TM Menu
The Sonar X-Press TM Menu provides access to the settings most
frequently-used. Press the MENU key once while in any of the Sonar
Views to access the Sonar X-Press
TM Menu.
NOTE: Menu choices will vary depending on system settings such as
whether the unit is set for Advanced User mode or what transducer is
currently selected.
Side
(WideSide® transducer: WideSide® view only)
Side sets which transducer beam from the WideSide® Transducer is shown in the WideSide® View.
A WideSide® transducer must be connected to the 700 Series™ Fishing System. The Side menu
choice is available when Transducer Select is set to WideSide® (see Sonar Menu Tab: Transducer
Select) and can only be accessed from the Sonar X-Press
TM menu when you are in WideSide® view.
NOTE: Side requires the purchase of the WideSide® transducer. You can visit our website at
www.humminbird.com to order this accessory online or contact our Customer Resource Center at
1-800-633-1468.
To adjust the Side:
1. Make sure you are in WideSide® Transducer Mode and that a WideSide® transducer is
connected, then highlight Side on the Sonar X-Press TM menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Side setting.
(L [Left], Both, R [Right], Default = Both)
Sonar X-Press TM Menu
48