After use – Harbor Freight Tools Weight Distribution hitch 67649 User Manual
Page 8
Page 8
For technical questions, please call 1-800-444-3353.
SKU 67649
aFter use
Note the number of chain links used to
1.
make reconnection to the same trailer
and load easier.
raise the front of trailer and back of
2.
the towing vehicle 3”.
this will make disconnection easier
and safer.
note: the brackets will be under tension,
use the handle (5) supplied and
handle carefully to prevent injury.
Slide Handle (5) over pin on Bracket and
3.
careFullY rotate down completely to
release Chain. Repeat for other side.
Disconnect trailer from hitch ball.
4.
the spring bars (4) Must be removed
5.
if the trailer is not attached:
Hold onto the Spring Bar while prying the
Retaining Pin Spring (2a) back, pulling
the Bar Retaining Pin (2b) outwards.
The Spring Bar should drop out of the
Weight Distribution Head (2).
Check local regulations to determine if
other components can be left in place or
must also be temporarily removed.