Oil change – HONDA GX160 User Manual

Page 7

Advertising
background image

ENGLISH

Oil Change

OIL FILLER CAP/DIPSTICK

DRAIN PLUG

WASHER

UPPER LIMIT

7

Drain the used oil when the engine is warm. Warm oil drains
quickly and completely.

Place a suitable container below the engine to catch the used oil,
then remove the oil filler cap/dipstick, oil drain plug and washer.

Allow the used oil to drain completely, then reinstall the oil
drain plug and new washer, and tighten the oil drain plug
securely.

With the engine in a level position, fill with the recommended oil
(see page

) to the upper limit mark (bottom edge of the oil fill

hole) on the dipstick.

Please dispose of used motor oil in a manner that is compatible
with the environment. We suggest you take used oil in a sealed
container to your local recycling center or service station for
reclamation. Do not throw it in the trash, pour it on the ground,
or pour it down a drain.

Running the engine with a low oil level can cause engine
damage. This type of damage is not covered by the Distributor’s
Limited Warranty.

Install the oil filler cap/dipstick and tighten securely.

3.

4.

1.

2.

6

07/06/01 18:29:36 32Z4F800_007

Advertising