Blender safety, Important safeguards save these instructions – Hamilton Beach 840071000 User Manual

Page 2

Advertising
background image

2

IMPORTANT SAFEGUARDS

SAVE THESE INSTRUCTIONS!

Blender Safety

When using electric appliances, basic safety
precautions should be followed, including
the following:

1. Read all instructions.
2. To reduce the risk of electrical shock,

do not put cord, plug, base, or motor in
water or other liquid.

3. Close supervision is necessary when

any appliance is used by or near children.

4. Unplug cord from outlet when not in

use, before putting on or taking off
parts, and before cleaning.

5. Avoid contact with moving parts.
6. Do not operate any appliance with a

damaged cord or plug, or after the
appliance malfunctions or is dropped or
damaged in any manner. Call our toll-free
customer service number for information
on examination, repair, or adjustment.

7. The use of attachments, including

canning jars, not recommended or sold
by Hamilton Beach/Proctor-Silex, Inc.
may cause a risk of injury to persons.

8. Do not use outdoors.
9. Do not let cord hang over edge of table

or counter, or touch hot surfaces,
including the stove.

10. Keep hands and utensils out of

container while blending to reduce the
risk of severe personal injury and/or
damage to blender. A rubber spatula
may be used but must be used only
when blender is not running.

11. Blades are sharp, handle carefully.
12. Do not use a broken, chipped or

cracked blender jar.

13. Do not use broken, cracked or loose

cutting blades.

14. To reduce the risk of injury, never place

cutting unit blades on base without jar
properly attached.

15. Always operate blender with cover

in place.

16. When blending hot liquids, remove

center piece of two-piece cover. Do
not fill blender container beyond the
3 cup level. Always begin processing
at the lowest speed setting. Keep
hands and other exposed skin away
from the cover opening to prevent
possible burns.

17. Screw on jar retaining ring firmly. Injury

can result if moving blades accidentally
become exposed.

18. If the jar should turn when the motor is

switched ON, switch OFF immediately
and tighten jar in threaded retaining ring.

19. Do not leave blender unattended while

it is operating.

20. To disconnect cord, turn the control to

OFF, then remove plug from wall outlet.

21. Do not use appliance for other than

intended purpose.

Advertising