Harman-Kardon HD 970 - Manual (Page 5)

FRONT-PANEL CONTROLS 5
Front-Panel Controls
1 Main Information Display: This display
delivers messages and status indications to help
you operate the CD player.
2 Power On/Off (Standby): Press the button
once to turn the CD player on, press it again to
put the unit in the Standby mode.
3 Open/Close: Press this button to open or
close the Disc Tray.
4 Play: Press to initiate playback or to resume
playback after Pause has been pressed.
5 Pause: Press this button to momentarily
pause playback. To resume playback, press the
button again. If a CD is playing, the sound will
be muted.
6 Stop: Press this button to stop the disc
currently being played or to exit program mode
(see page 13 for complete information).
7 Skip/Search (Previous): Press this button
to move backward through the music tracks on
a CD disc. Keep the button pressed to search
backwards at one of the available speeds.
8 Skip/Search (Next): Press to move forward
through the music tracks on a CD. Keep the
button pressed to search forwards at one of the
available speeds.
9 Dimmer: Press this button to reduce the
brightness of the Information Display by 50% or
to turn the display off completely in the
following order: FULL BRIGHTNESS
➜ HALF
BRIGHTNESS ➜ OFF ➜ FULL BRIGHTNESS.
Important Note: When the unit is turned off
(to Standby), pressing the Play button 4
9
on the front or on the remote will automatically
turn on the player and start playback.
1
2
3 4
5
6 7
8
9 Main Information Display
Power On/Off (Standby)
Open/Close Play
Pause
Stop Skip/Search (Previous)
Skip/Search (Next)
Dimmer
HD 970
Play Display SKip/Search Stop Pause Open/Close