Hisense Group KF 346GWE - Manual (Page 17)

15
Special Remarks
In the event of power failure,the unit will stop.When the power is resumed,
the unit will restare automatically after three minutes.
In cooling operation,some plastic parts may expand or shrink due to a sudden temperature
change. In this event,a clicking sound may occur. This is normal,and the sound will soon
disappear.
The remote control unit sends the temperature signal to the air conditioner regularly
at three-minute intervals. If the signal from the remote control unit stops for more
than ten minutes due to the loss of the remote control unit or other trouble, the air
conditioner will switch to the temperature sensor which is built into the indoor unit
and control the room temperature. In these cases, the temperature around the
remote control unit may differ from the temperature detected at the air conditioner s
position.
Power failure
during operation
Clicking Sound
Clicking sound is
heard from the air
conditioner
Remote Control Unit