Humax IR-FOX C - Manual (Page 14)

**
This chapter describes how to connect the product to the TV with the particular equipments for
gaining optimum signal quality. The product provides various interfaces to connect to the TV,
VCR or other devices. Select the most appropriate procedure depending on the equipment you
have.
Note: If you encounter any problems setting up your product, please contact your local
product distributor.
2.1 Connecting the Cable
1. Connecting TV
This is the most simple setup mode.
**
**
• Connect your CATV line to the CABLE IN socket on the product for receiving cable
services.
• The TV SCART is connected as in the figure above.
2. Setup
GB 13