Honeywell BC7000L1000 - Manual (Page 26)

REPLACING AN R4140G OR WITH START
INTERLOCKS WITH A
BC7000L/PM720G2005 /PM720G2013
BC7000L/PM720G2005 /PM720G2013
STEPS FOR CONVERSION
1. START INTERLOCKS BECOME PREIGNITION INTERLOCKS.
2.
3.
4.
FOR PM720G2005 ONLY JUMPER 15 TO 8 FOR 30-SECOND
TRIAL FOR MAIN FLAME AT TERMINAL NO. 6.
TERMINAL 16 MUST BE USED ON THE BC7000. IF AN
EXTERNAL TIE POINT WAS PREVIOUSLY USED ON THE R4140G
OR R4150G TO BE REPLACED, IT MUST BE LOCATED AND
WIRED TO TERMINAL NO. 16.
FOR INTERMITTENT PILOT USE PM720G2013.