Honeywell PIR Application Guide for TB7200 and TB7300 Series s 63-4526-01 - Manual (Page 35)

PIR APPLICATION GUIDE FOR TB7200 AND TB7300 SERIES THERMOSTATS
35 63-4526—01
PIR Status LED’s
The PIR covers have 2 green status LEDs behind the PIR lens that can be used for diagnostic purposes during commissioning or
servicing. (Fig. 8)
These LEDs are used to indicate a local movement detected by the PIR cover.
— The status LEDs start to function to indicate movement 1 minute after the initial power up of the thermostat.
— The status LEDs will only remain active to indicate sensed movement 30 minutes after the initial power up of the
thermostat.
Fig. 8. LED status lights.
SPECIFICATIONS
PIR cover power requirements: 5 Vdc max current draw of 7mA
Operating conditions: 0 C to 50 C (32 F to 122 F); 0% to 95% R.H. non-condensing
Storage conditions: -30 C to 50 C (-22 F to 122 F); 0% to 95% R.H. non-condensing
Sensor: Local Passive Infrared Sensor
Dimensions: 4.94 in. x 3.38 in. x 1.0 in.
Approximate shipping weight: 0.1 lb
Agency Approvals:
UL: UL 873 (US) and CSA C22.2 No. 24 (Canada), File E27734 with CCN XAPX (US) and XAPX7 (Canada)
FCC: Compliant to CFR 47, Part 15, Subpart B, Class A (US)
Industry Canada: ICES-003 (Canada)
CE: EMC Directive 89/336/EEC (Europe Union)