Haan SI-75 - Manual (Page 14)

12
White spot left on floor.
Unit does not emit steam.
Water left on floor.
Unit not operating.
• When cleaning do not leave unit in one spot for too long.
• Use protector pad / floor mat when unit is ON and stationary.
• Use distilled water instead of hard tap water.
NOTE: To remove spot, use a damp cloth with a few drops of white vinegar
to rub and remove stain.
• Ensure water tank is filled with water.
• Change the Ultra-microfiber pad.
• Ensure unit is always level and parallel to the floor.
• Ensure plug is set firmly in outlet.
• Replace fuse or reset breaker.
Troubleshooting
Problem Solution
12
Using the Long Extension Hose
Adds maneuverability when cleaning hard to reach areas. Works with the Small Steam
Head Attachment, Angled Nozzle Attachment and Brush Attachment.
*Works with the Small Steam Head Attachment, Angled Nozzle Attachment and Brush Attachment.
OPE N CLO SE CLO SE CLO SE OPE N CLO SE CLO SE CLO SE OPE N CLO SE CLO SE CLO SE
“Locked”
Position