HP ML350 - Manual (Page 11)

Server Power Cords ProLiant ML servers in a rack-mount configuration no longer ship standard with NEMA power
cords that allow connection to 110V US wall outlets in a home or office. These servers are
primarily connected to PDU's in data center racks so they now ship standard with only a PDU
power cord (416151-B21). If a user wishes to power a ProLiant ML rack-mount server using a
110V receptacle (NEMA-15), the NEMA power cord must be ordered separately. The 12' cord
(AF556A) or 6' cord (187335-001) can be purchased online at HP.COM. In a tower configuration,
the servers ship standard with a 6' country specific NEMA power cord. If customers require a local
power cord, they can check the power cord matrix for the appropriate country specific sku. Please
see the following power cord matrix:
http://www.hp.com/go/powercordmatrix .
UPS and PDU Power
Cord Matrix Please see the UPS and PDU cable matrix that lists cable descriptions, requirements, and
specifications for UPS and PDU units:
http://h18004.www1.hp.com/products/servers/proliantstorage/power-protection/index.html
Power Supply 800 Watt-CE Mark Compliant Hot Plug Power Supply (1000 Watt high line)
Optional second Power Supply provides redundant capability
NOTE: Please see the "Power Specifications" section later in this document for low line and high
line requirements.
System Fans 2 fans ship standard, dual redundant fans are optional, 4 fans total supported (does not include
power supply or processor heat sink fans)
Required Cabling For required cabling information, refer to the HP ProLiant ML350 G5 cabling matrix at:
http://www.hp.com/servers/proliantML350 .
NOTE: Please see the "Storage" section of this QuickSpecs for important information on
controllers and cables required to support SAS or SATA hard drives as well as storage
management software available for SATA hard drives.
Operating Systems and
Virtualization Software
Support for ProLiant
Servers Microsoft Windows Server
Microsoft Windows Server Hyper V
Red Hat Enterprise Linux
(RHEL)
SUSE Linux Enterprise Server (SLES)
Oracle Enterprise Linux (OEL)
NetWare
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available for your server, please visit
our Support Matrix at:
http://www.hp.com/go/supportos and our driver download page
www.hp.com/support/ML350G5 .
Installation of Server
into Telco Racks Support for all 2-post Telco racks requires the use of the HP ProLiant ML350 G5 rack kit and an
additional option kit from Rack Solutions.
http://www.racksolutions.com/hp .
QuickSpecs
HP ProLiant ML350 Generation 5
Standard Features
DA - 12475 Worldwide QuickSpecs — Version 44 — 4.27.2009 Page 11