Harman-Kardon HKTS 14 - Manual (Page 4)

VCR (Video 1) TV or Video Monitor
In/Rec
Out/Play
IN
L R VIDEO Video S-Video Component Video
Y Pb Pr
Component Video
Y Pb Pr
Cable or Sat or HDTV Set-Top Box (Video 2)
OUT
L R Video S-Video
Optical Coax
AUDIO RECORDER
REC/IN
PLAY/OUT
SOURCE COMPONENT CONNECTIONS
Device Connection Options : Recommended connections are shown in red, but connections may be made to best fit your system requirements. The Video 4, Coax 3 and Optical 3 inputs are on the front panel of the receiver.
Device Input Name Audio Input Connections Audio Output Connections Video Connections
CD Player CD CD L/R Inputs, Optical Digital 1, 2 or 3, or Coaxial Digital 1, 2 or 3 Not required Not required
DVD Player DVD Coaxial Digital 1 , 2 or 3, Optical Digital 1, 2 or 3, or DVD L/R Inputs Not required DVD Component, Composite or S-Video
VCR Video 1 Video 1 L/R Inputs Video 1 L/R Outputs Video 1 Composite or S-Video Input and Output
Cable Box or Satellite Receiver Video 3 Video 3 L/R Inputs, Optical Digital 1/2/3 * , or Coaxial Digital 1/2/3 * Inputs Not required Video 3 Composite or S-Video Input
Audio Recorder Tape Tape L/R Inputs, Optical Digital 1/2/3 ** or Coaxial Digital 1/2/3 ** Inputs Tape L/R Outputs, Digital Optical ** or Coaxial Outputs ** Not required
TV or Projector Not applicable Not required Not required Monitor-Out Component, Composite and/or S-Video
* Check with your cable company to determine whether digital audio is available for all channels. It may be necessary to make BOTH analog and digital connections if it is not. ** Digital audio recorders only.
250 Crossw
ays P
ark Drive
,W
oodbury
,New
York 11797 www
.harmankardon.com
© 2004 Harman International Industrie
s,
Incorpor
ated P
art No
.CQE1A235Z
Power for the Digital Revolution . ®
®
Figure 6 – Source Component Connections
Dashed lines (– – – –) indicate coax and optical digital audio connections. Choose either type (but not both) for each
digital audio source.
Dotted lines (••••) indicate component, composite or S-vdeo connections. Component video is the preferred connection
when available, but you may use any of the three types (but not more than one). When component, composite and
S-video sources are connected to the AVR, you must also connect all outputs from the AVR to your TV.