HP 612 - Manual (Page 35)

Sharing and printing images 27
Installing the software on a Windows
computer
1 Insert the HP photosmart 612 CD into your computer’s CD-
ROM drive. The installation window automatically appears.
Note If the installation window does not appear, click
Start, and then click Run. Type X:\Setup.exe,
where X is the letter of your CD-ROM drive.
2 Click Next, and then follow the instructions on the screen to
install the software.
Certain versions of the camera are shipped with bonus software.
Keep the HP photosmart 612 CD-ROM in the computer’s
CD-ROM drive and continue to the next section to install the
bonus software.
To install the bonus software
1 Click Start, click Run, and in the Open box, type
X:\Bonus\setup.exe (where X is the drive letter assigned to
your CD-ROM drive).
2 Click OK, and then follow the instructions on the screen to
install the bonus software.
Connecting the camera to a Windows
computer
Before connecting the camera to your computer, make sure you
have installed the software.
Note The camera uses a USB connection, so you do not
need to turn the computer off when connecting or
disconnecting the camera.