HANNspree ST40-12A1 - Manual (Page 47)

46
Channel Add/Erase
1
Press the CH DOWN button to
select CH ADD/ERASE.
2
Press the VOL UP button. The OSD
menu display switches to the
following screen.
Press the CH UP/ CH DOWN button on
the front panel to select a channel.
Add Channel
Then press the VOL UP on the front
panel button to add the selected
channel. The channel number changes
from yellow into green after adding the
channel.
Erase Channel
Then press the VOL DOWN button on
the front panel to erase the selected
channel. The channel number changes
from green into yellow after erasing the
channel.
TV
TV/CATV
CH
AUTO PROGRAM
ADD/ERASE
MENU
SEL SEL ENTER ENTER MENU MENU
CATV
MENU MENU
TV
-ERASE ADD+
CH UP/DOWN
43
Note
You can still access the erased channel
by entering the channel number using
the number buttons on the remote
control. Add the channel again if it was
erased accidentally.