haier D1200P - Manual (Page 19)

15
2.4 Charging the Battery
The D1200P can be charged either when it is switched on or off.
1.Plug the charger transformer into a standard outlet.
2.Insert the charger output plug into charging connector of the bottom of the
phone.
3.The rolling of the electric quantity bar indicates that the phone begins to
charge.
4.When the battery level full and stop rolled, the phone will display '
'.
5.After charging is complete, switch off the electric supply and pull out the
charger's jack.
When the battery level is low and only a few minutes of talk time remain, a
beep is heard, the battery icon flashes and the phone displays '
'. When battery is drained completely, the phone
displays ' '
When the battery is completely discharged, your phone will turn off.
The battery can be charged whenever you want. However, using your phone
while charging can increase the charging time.
Battery full
Note:
Battery Low,
please recharge soon!
Battery too low, Power off soon!